Led Light System/DC-055s
Review
Description
SYSTEM SUMMARY
Spa light use cable daisy-chain together with locking Guardian overmolded connectors and anti-drop water joint to confirm the leakproofness and stability of whole
light system. This system designed to connect to spa controller via AC/DC 12V output connection. This either connects to one of master main lights or to a separate
controller. The master light or controller is then connected to one or more slave light by extending line. It is good waterfroof, easy installation to save both time and
labour. In addition, it’s significantly improved the working life of the light through low power supply by shift 12V to 5V. This is one hot-selling system in the U.S. and E.U. markets.
SYSTEM COMPOSTION
The customers can match the light quantity arbitrarily according to his requirement.
1.Master Light(Built-in synchronous controller).
2.Extended line.
3.Small Light. It can achieve one joint one light, one joint two lights, one joint three lights, one joint four lights.
Master Light
1.One master has 7 Leds, 6w, RGB color.
2.The cover diameter of master light is 5 inch, stainless
steel cover or plastic cover for your choice.
3.Installation way: Spa cylinder openings installtion.
4.Built-in synchronous controller.
5.Both input and output are four-core wire.
6.Volitage: shift AC12Vto 5V.
7.The input terminal of the power: Balboa two cores
connector, crystal cable five cores connector, teh
terminal by customer request.
Extended Line
1.It is used for connection and shunting among the lights.
2. Standrad length is 1.5m, the actual length can be
customized by customer request.
3. The upper limit ( one input terminal, three output port )
for one extending line is to connect three lighting sets.
As usual, connect two effective lighting sets when use it.
Small Light
1.The collocation mode can divide into one one joint one
light (0.2w), one joint two lights ( 0.4w), one joint three
lights (0.6w), one joint four lights(0.8w).
2.Voltage: DC5V, RGB color.
3.Standrad line is 0.75m, the actual length can be
customized by customer request.
4.There are many alternative cover design.
5.Both input and output are four-core wire.
HOW TO USE
1.Input Voltage: 12V(AC/DC)
2. All lights are controlled by the master light. It can effect color
positioning and color cycling(Note: The customers can als
choose, according to their needs, a separate synchronous
controller to achieve color positioning and color cycling ).
3.The Spa controller can effect the light switch and the colors
change, and at each given time, the color is change once.
4.The line to line connection adopts the use of a slot type
waterproof connector.
5.>The two sides of the extension line are connected with the
lights, and the other way is connected with the next set of
extension lines.
6.The master light controls the maximum number of lights
( 1 master light +108 small lights ).
