Bathtub Hydrotherapy Equippment Dual Lower Inlet Water Pumps XDA Series
- Model
- XDA75, XDA100, XDA120, XDA150
Item specifics
- Thermal protector:
- with thermal protector (single phase motor)
- Insulation rating:
- F
- Protection class:
- IP55
- Medium temperature:
- 5~50℃
- Ambient temperature:
- ≤50℃
- Maximum working pressure:
- 0.3MPa
Review
Description
Bathtub Water Pump Introduction
The pump is equipped with water pressure type waterless protection, and the pressure sampling and electric pump are integrated. The conduction pressure of the pressure switch is directly sampled from the pressure generated by the electric pump itself when it rotates. When there is no medium in the pump body, the water pressure switch cannot be turned on, thereby achieving the purpose of preventing the electric pump from operating when there is no water in the bathtub.
Bathtub Water Pump Parameter
Bathtub Water Pump Performance Curves
Bathtub Water Pump Dimension
Bathtub Water Pump Exploded View
NO. | NAME | |||
1 | Tie-in Nut | |||
2 | Tie | |||
3 | O-Ring | |||
4 | Hexagon Bolt | |||
5 | Washer | |||
6 | Pump Casing | |||
7 | O-Ring | |||
8 | Upper Cover | |||
9 | Cross Recessed Pan Head Tapping Screw | |||
10 | Float | |||
11 | Plastic Spacer | |||
12 | Air Drain Plug | |||
13 | Guide Plate | |||
14 | Impeller | |||
15 | Mechanical seal | |||
16 | Shaft Sleeve | |||
17 | O-Ring | |||
18 | Pump Cover | |||
19 | Motor | |||
Bathtub Water Pump Applications
